The IATF 16949 Internal Auditor Training is a participative course is made up of a number of modules supported by group exercises and open discussion. This course is available virtually in different timezones, please refer to the timezone section below.

This participative course is made up of a number of modules supported by group exercises and open discussion. Delegates are evaluated through a proctored knowledge and application exam at the end of the course. The practical emphasis of this course and high tutor to delegate contact provides a unique opportunity for a substantial degree of individual guidance and training.

Consistently IATF highlights Problem Solving as the most common nonconformity. There are plenty of steps your organisation can take to enhance its problem-solving capabilities and in an IATF 16949-compliant manner.

AIAG & VDA Combined Process FMEA: Transitioning for Practitioners is designed to take delegates through the 7 Step Approach to the construction, scoring and evaluation of risk (high, medium, low) and explain how to fully implement the new AIAG/VDA approach.

APQP and Control Plan is module one of the Core Tools Certification Training programme. This module can be completed as a standalone course or as part of the full Core Tools Certification Training.

Failure Modes and Effects Analysis, (FMEA), is an analytical method to ensure potential problems have been considered, assessed for risk and actioned as part of both product and process design. It provides a record of an organisations collective knowledge about products and processes. It is widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation. This course is based on the AIAG & VDA FMEA Handbook.

Statistical Process Control, (SPC), is a method for gaining an understanding of the types of variation within a process and hence guide actions to either control or reduce this variation. It is used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation.

Measurement System Analysis, (MSA), is a method for gaining an understanding of the variation present in measuring systems. It is now widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation, when a high level of confidence is required for the measurement of product characteristics.

Production Part Approval Process, (PPAP), is a method of demonstrating a product or process is production ready. The method was developed by the North American Automotive Industry and is now widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation.

The Core Tools Certification Training (APQP, Control Plan, FMEA, SPC, MSA and PPAP) is a 5 day course covering all the core tools using a "learn by doing" teaching approach. After short teach points delegates practice the use of the tools using case studies and delegate exercises. Delegates passing the application exam at the end of the course receive certification from the SMMT IATF approved oversight office in the UK.

The joint publication is the collaboration between AIAG/VDA, OEMs and Tier 1 suppliers. The text has been completely rewritten and the FMEA method has been revised in a few key areas.

The AIAG/VDA Combined FMEA Awareness Training (1 day) course is designed to take delegates through the 7 Step Approach to the construction, scoring and evaluation of risk (high, medium, low). The joint publication is the collaboration between AIAG/VDA, OEMs and Tier 1 suppliers. The text has been completely rewritten, and the FMEA method has been revised in a few key areas.

AIAG & VDA Combined Process FMEA: Transitioning for Practitioners is designed to take delegates through the 7 Step Approach to the construction, scoring and evaluation of risk (high, medium, low) and explain how to fully implement the new AIAG/VDA approach.

Consistently IATF highlights Problem Solving as the most common nonconformity. There are plenty of steps your organisation can take to enhance its problem-solving capabilities and in an IATF 16949-compliant manner.

This training provides you with the basics for performing process audits according to VDA 6.3, considering the process-oriented approach and customer-specific requirements for comprehensive application in the automotive industry.

This training provides you with the basics for performing process audits according to VDA 6.3.

Every organisation within the automotive supply chain is obligated to ensure the safety and conformity of its products. The aim of this two-day qualification is specifically geared to the requirements in the participants’ daily practice.

This 5 day AS9145 Practitioner course will provide all delegates with an in-depth understanding at practitioner level of the AS9145 standard. It will provide all delegates with an in-depth understanding of the advantages and expected benefits of using the APQP and PPAP processes from planning, product design and development through to process design, validation and on-going production.

This course covers the training syllabus requirements of AS13100 and AESQ Reference Manual RM13000 8D Problem Solving. The AESQ Reference Manual RM13000 mandates the use of the Eight Disciplines (8D) approach to structured problem solving to provide a repeatable structured approach irrespective of customer.

FMEA is an analytical method to ensure potential problems have been considered, assessed for risk, and actioned as part of product and process design. It provides a record of an organisation's collective knowledge about its products and processes. The intent of the control plan is to document and provide value added controls in support of the PFMEA process. Implementation of an effective DFMEA, PFMEA and control plan form key foundation activities in support of the zero-defect goal.