Courses: Automotive

Home » Courses

AIAG%20VDA%20DFMEA%20Practitioner%20.jpg

AIAG VDA DFMEA Practitioner

AIAG & VDA Design FMEA: Transitioning for Practitioners is designed to take delegates through the 7 Step Approach to the construction, scoring and evaluation of risk (high, medium, low) and explain how to fully implement the new AIAG/VDA approach

AIAG VDA PFMEA Practitioner

IATF%2016949-2016%20Internal%20Auditor%20Training.jpg

IATF 16949:2016 Internal Auditor Training

The IATF 16949 Internal Auditor Training is a participative course is made up of a number of modules supported by group exercises and open discussion. This course is available virtually in different timezones, please refer to the timezone section below.

IATF%2016949-2016%20Management%20Awareness%20Training.jpg

IATF 16949:2016 Management Awareness Training

The IATF 16949 Management Awareness Training is an interactive course supported by group exercises and open discussion. The practical emphasis of this course provides a great opportunity for individual guidance, support and learning.

IATF 16949:2016 Lead Auditor Training

This participative course is made up of a number of modules supported by group exercises and open discussion. Delegates are evaluated through a proctored knowledge and application exam at the end of the course. The practical emphasis of this course and high tutor to delegate contact provides a unique opportunity for a substantial degree of individual guidance and training.

Core%20Tools%20Certification%20Training%20%28APQP%2C%20Control%20Plan%2C%20FMEA%2C%20SPC%2C%20MSA%20and%20PPAP%29.jpg

Core Tools Certification Training (APQP, Control Plan, FMEA, SPC, MSA and PPAP)

The Core Tools Certification Training (APQP, Control Plan, FMEA, SPC, MSA and PPAP) is a 5 day course covering all the core tools using a "learn by doing" teaching approach. After short teach points delegates practice the use of the tools using case studies and delegate exercises. Delegates passing the application exam at the end of the course receive certification from SMMT, the IATF approved oversight office in the UK.

Advanced%20Product%20Quality%20Planning%20%28APQP%29%20and%20Control%20Plan%20Training.jpg

Advanced Product Quality Planning (APQP) and Control Plan Training

APQP and Control Plan is module one of the Core Tools Certification Training programme. This module can be completed as a standalone course or as part of the full Core Tools Certification Training.

Failure%20Mode%20and%20Effects%20Analysis%20%28FMEA%29%20Training.jpg

Failure Mode and Effects Analysis (FMEA) Training

Failure Modes and Effects Analysis, (FMEA), is an analytical method to ensure potential problems have been considered, assessed for risk and actioned as part of both product and process design. It provides a record of an organisations collective knowledge about products and processes. It is widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation.

Statistical%20Process%20Control%20%28SPC%29%20Training.jpg

Statistical Process Control (SPC) Training

Statistical Process Control, (SPC), is a method for gaining an understanding of the types of variation within a process and hence guide actions to either control or reduce this variation. It is used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation.

Measurement%20Systems%20Analysis%20%28MSA%29%20Training.jpg

Measurement Systems Analysis (MSA) Training

Measurement System Analysis, (MSA), is a method for gaining an understanding of the variation present in measuring systems. It is now widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation, when a high level of confidence is required for the measurement of product characteristics.

Production%20Part%20Approval%20Process%20%28PPAP%29%20Training.jpg

Production Part Approval Process (PPAP) Training

Production Part Approval Process, (PPAP), is a method of demonstrating a product or process is production ready. The method was developed by the North American Automotive Industry and is now widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation.

AIAG%3AVDA%20Combined%20FMEA%20Awareness%20Training.jpg

AIAG/VDA Combined FMEA Awareness Training

The AIAG/VDA Combined FMEA Awareness Training (1 day) course is designed to take delegates through the 7 Step Approach to the construction, scoring and evaluation of risk (high, medium, low). The joint publication is the collaboration between AIAG/VDA, OEMs and Tier 1 suppliers. The text has been completely rewritten, and the FMEA method has been revised in a few key areas.